<?xml version="1.0" encoding="utf-8"?>
<Spec id="490" path="\8\c\8c5537af6716b9d3e0b9f8f4e17d7c03.pdf"><Text id="84671" page="6">All the materials used for Facility shall be new and in Compliance to ASME Sec II, (Materials). Equipment in Sour Service shall comply with NACE MR-0175/ISO 15156. In addition to this HIC testing shall be performed in accordance with NACE TM 0284 for wetted parts of carbon steel plates, welded pipes and welded fittings.</Text><Text id="84672" page="6">Welding and NDT shall be per KOC standard KOC-MW-001 and/ or ASME Sec IX, ASME Sec V.</Text><Text id="84673" page="6">All packaged systems shall consist of Piping, Valves, Electrical, Instrumentation and Controls as per respective Discipline Technical Specifications.</Text><Text id="84674" page="6">The elevation of PSV nozzles shall be such that it is located higher than the elevation of Flare Gas Header with a minimum slope of 1:500 of Flare Gas Header connecting line.</Text><Text id="84675" page="6">All equipment inside the packaged units shall be designed as per respective KOC Standards and / or International Standards as specified in the clauses below.</Text><Text id="84676" page="6">Safety Ladders, Cage and Gate will be coated with different color, preferably yellow for easy identification.</Text><Text id="84696" page="6">Wind load and seismic load shall be as per KOC standards KOC-C-001 and KOC-G- 007.</Text><Text id="84697" page="7">Design, materials, fabrication, inspection, and testing shall be in accordance with KOC Specification KOC-MV-007 and / or API 650.</Text><Text id="84698" page="7">Design for wind load shall be based on API 650 and seismic design shall be carried out as per Appendix E of API 650.</Text><Text id="84700" page="7">Tanks shall be provided with internal lining as per the requirements specified in Company Standard KOC-P-002 (Part 2).</Text><Text id="84701" page="7">Cathodic protection system shall be provided in accordance with the requirements specified in the KOC specification, KOC-L-018 and KOC-L-026.</Text><Text id="84702" page="7">External Painting shall be as per requirements specified in Company Standard KOC-P- 001.</Text><Text id="84705" page="7">Cathodic protection system shall be provided in accordance with the requirements specified in the KOC specification, KOC-L-018 and KOC-L-026.</Text><Text id="84706" page="7">External Painting shall be as per requirements specified in Company Standard KOC-P- 001.</Text><Text id="84707" page="7">Design, materials, fabrication, inspection, testing and stamping shall be as per KOC Standard KOC-MV-001 and ASME Section VIII, Div. 1.</Text><Text id="84711" page="8">Pressure vessels shall be provided with internal lining as per the requirements specified in KOC Specification, KOC-P-002 (Part 3). All internals including corrosion resistant alloys shall be coated as per KOC-L-018 for cathodic protected vessels.</Text><Text id="84713" page="8">All Carbon Steel Pressure vessels intended for sour service shall be Post Weld Heat Treated (PWHT) as per KOC-MV-001.</Text></Spec>