<?xml version="1.0" encoding="utf-8"?>
<Spec id="646" path="\4\6\4646b46fba53e1364ff4ef7ee04b8b7a.pdf"><Text id="91776" page="2">A co-rotating, fully intermeshing twin-screw extruder with throughput range 1.5 to 3.0 kg/h.</Text><Text id="91777" page="6">Each barrel zone shall have an independent PID-controlled electrical heater with active forced-air or liquid cooling.</Text><Text id="91779" page="2">Equipment designed for easy manual disassembly and cleaning between product changeovers.</Text><Text id="91780" page="6">Zone temperature control accuracy: ± 1°C at steady state.</Text><Text id="91783" page="11">FAT shall be executed at the vendor’s manufacturing facility; purchaser participation and co-signature of results is mandatory.</Text><Text id="91784" page="6">All temperature sensors shall be Pt100 Class A (IEC 60751) with documented calibration traceability.</Text><Text id="91786" page="7">Data export shall be possible in open formats (CSV, JSON, XML) without requiring proprietary licensed software for data retrieval.</Text><Text id="91804" page="2">• Downstream processing equipment: the vendor shall include in the proposal a size reduction system, cooling conveyor or belt, calendering unit, and milling system suitable for pharmaceutical ASD extrudate processing. These may be supplied as integrated modules or as validated ancillary equipment from the same vendor.</Text><Text id="91811" page="4">• All feeder product-contact surfaces shall meet the same material and surface finish standards as the extruder barrel.</Text><Text id="91812" page="4">• Feeder hopper and all product-contact parts shall be easily removable for manual cleaning without special tools.</Text><Text id="91937" page="4">secondary solid addition. • Feeder screws shall be interchangeable to accommodate a wide bulk density range (0.1 – 1.2 g/mL).</Text><Text id="91939" page="4">achievable in ≤ 30 minutes by a single operator using only supplied tooling.</Text><Text id="91940" page="4">Shaft coupling element; connects to gearbox spline and initiates material intake into the barrel</Text><Text id="91946" page="6">All product-contact parts (barrel segments, screw elements, die assembly, feeders) shall be removable by a single operator for manual cleaning using only the supplied tool kit, without the need for heavy lifting equipment.</Text><Text id="91947" page="3">Barrel segments shall be horizontally split (clamshell design) or modular bolted for ease of opening, inspection, screw removal, and manual cleaning without major disassembly.</Text></Spec>